PCR series provides bellows-contact type high-density connectors, which can support a wide variety of applications.
The PCR is a sister series of PCS series connectors, since accessories such as backshell and termination tool can be shared between the PCR and PCS series.
- • Board-to-cable connectors provide a wide variety of contacts, 20 - 96 contacts.
- • EMI-filtered design meets FCC and other standards.
- • Board-to-board connectors also provide a wide variety of contacts, 20 - 128 contacts.
- • Allows live wire connections for power terminals and signal terminals in three stages.
- • Backshell with mating guide for preventing short circuit allows parallel mating.
- • Best suited for parallel, horizontal, or vertical-stacked connections.
Office automation equipment, instrumentation equipment, communications equipment, factory automation, etc.
Board-to-board connector
| item | value |
|---|
| Rated voltage | 250V AC (r.m.s.) |
| Rated current | 1 A |
| Insulation resistance | Over 1000 megohms at 500V DC |
| Dielectric withstanding voltage | 750V AC (r.m.s.) for 1 minute |
| Contact resistance | 35 milliohms or less |
Board-to-cable connector
| item | value |
|---|
| Rated voltage | 250V AC (r.m.s.) |
| Rated current | 1 A |
| Insulation resistance | Over 1000 megohms at 250V DC |
| Dielectric withstanding voltage | 500V AC (r.m.s.) for 1 minute |
| Contact resistance | 35 milliohms or less |
- Other
-
IDC tool PCRseries
The product information in this data is for reference only.
This is subject to change without notice.
Contact our sales staff for further information before considering or ordering any of our products.
Please request the Engineering Drawing for the most current and accurate design information.
